All E-Cigarettes are considered consumables, and therefore subject to wear and tear, however, maintenance can increase the life of your parts.When the initial charge is used up, charge the battery, until the light turns green on your charger (this takes about 3 hours), or if your charger hasn't got an indication light, leave it on charge for about 3 hours.Keep the battery connections dry as any liquid puddle or dried liquid in the battery will cause a lack of connection to the atomiser/ clearomiser/ cartomiser or charger.This will cause you to automatically draw harder, to get it to work and is harsh on the atomiser/ clearomiser/ cartomiser, or worst case, couse a short in the battery.This also can cause for too much liquid to be dumped into the atomiser, causing the atomiser to get hot, leak or not produce any vapour.Use an ear bud to clean out the connection, as this the easiest way, especially around the threads.Once every two weeks, take an ear bud dipped in alcohol, and thoroughly wipe out the battery connection to remove any dried liquid.

If you have been noticing your batteries are not holding their charge like they used to, they probably need cleaned.Also don't forget to clean  the charger connection with a dry cloth or ear bud.The battery not working, or flashing, is the circuits’ way to tell you there is something wrong It could be something as simple, as the centre pin having been pushed down, causing the battery not to function properly This is a quick & easy fix for the most common issues with an eGo style battery.You can Watch the video The other issue being you dropped it and the wires have snapped you can tell the difference as with a snapped wire the activation led will flash.We will create a fix video for this at some point in the future but this video fix is for NON Firing atomisers/ cartomisers/ clearomisers on eGo Style batteries.eGo RS The New eGo-RS  main feature is: that it has a removable 14500 battery, which you can replace whenever you want, by simply unscrewing the end cap!Something you can’t do with standard eGo style batteries.

The eGo-RS all-round appearance: in general looks the same, as the ego style batteries.The battery thread is exactly the same as normal ego style batteries, and fits various atomisers, cartomisers and clearomisers, E.G:  ego-T atomiser/Tank system, CE4/CE5 & any Standard 510 atomisers.e cigarette shop redditchIt can be charged in two ways: Using a regular ego style USB (fast) charger, or you can remove the 14500battery (900mAh) and use a battery charger capable of charging li-lion3.7vBatteries (using a battery charger preferred) SingleBattery Weight: 43 g Length: 88.2 mm Diameter: 15 mm EGO-RS 14500 Battery capacity: 900 mAh eGo Passthrough The eGo passthrough: is amanually operated battery that has an end cap, that can be removed to allow theuser to plug the device in to a USB port, and therefore it can be used like apass-through.e cigarette york region

The battery can also be used like a standard eGo battery.The eGopassthrough: has a 5 click on/off button, which can be used to prevent unwanted activation when thedevice is not in use.e cigarette reviews 2012When in the on position, you just push the button which will light up blue.Charging the eGo passthrough: takes about 3 hours, and can be charged in either of 2 ways, Simply unscrew the end cap and attach the USB cable, to use it as a pass through.When you click 5 times to switch it off it stops unwanted activation, though, you could still use it whilst sitting in front of the computer, whilst it is charging.2:Through a 510 connection, though not recommended When used as a battery, you can click 5 times to switch it off to stop unwanted activation.We recommend you only charge with a USB cable and not through the 510 connection!The eGo LED Variable Voltage like other eGo style batteries, is a manually operated battery.

It has a 5 click system to switch through the 3 Voltage settings, with an LED ring that lights up in a different colour for every Voltage setting The 3 Voltage stages are as followed; Red Ring - 3.2v Purple Ring - 3.7v Blue Ring - 4.2v The battery thread is exactly the same as other ego style batteries, and fits various atomisers, cartomisers and clearomisers, E.G:  CE4/CE5.Vivi Nova's and any Standard 510 atomisers.It can be charged, Using a regular ego style USB (fast) charger Unlike other eGo style batteries, this eGo LED Variable Voltage hasn't got an on/off option eGo This eGo mode How does it work?The Big Button under the LED .V, Wattage mode, This eGo mod battery voltage 2x 18350's 18650 battery The difference Vamo v2 2 modes Main features The Tesla has an OLED screen (similar style as the EVIC), and features great, well placed steel buttons.It is built well, works well and is definitely worth owning!

The Tesla is the same length as the VAMO in full size.It has an ergonomically slotted tube.You can use most eGo -510 style clearomisers/ atomisers/ cartomisers, etc… This APV fits perfectly in the hand, is light weight, and very easy to operate.This would easily fit into any seasoned vaper’s collection or even make a great beginner starter kit, for a diligent first timer.What do you get in this Tesla Variable Voltage/Wattage APV Kit 1x Tesla body 2x 18650 rechargeable batteries 1x Charger 1x Dual Coil Tank with Cartomiser 1X spare Cartomiser for the DCT 1x User guide , 1 2.User Operation Upon the Tesla’s system start up, the Screen will boot up with the word Tesla, if the battery is low the display will boot with the words “Low V” .During the boot sequence of this device, do not attempt to operate any functions, but allow the device to boot into standby please.When the system boots into standby, use the fast click (5 click on/ off function) to turn the device on.

The word Tesla will display on the screen.If the battery voltage is sufficient for operation, the system will turn on and display the message “System on.” Upon first turning the system on, the output will be in a  “locked” state, press both the - and + buttons at the same time to switch the unit into an unlocked state, and you will be able to adjust operations.The large button is your activation button.To toggle the device between on or off, you need to fast-click the activation button 5 times (button presses must be very fast, within two seconds.)When the unit is off, there will be no output from the Tesla, and the OLED will not display.When on, the Tesla will be ready to use.The - (minus) button is the voltage and wattage reduction button.Pressing - , will adjust the current value of either voltage or wattage down, and the corresponding voltage, or wattage numbers will be displayed on the OLED screen.When the unit is adjusted below 3.0V, or 3.0W, it will cycle back to the highest setting (6.0V or 15W.)

The + (plus) button is the voltage and wattage increase button.Pressing + will adjust the current value of either voltage or wattage up, and the corresponding voltage or wattage numbers will be displayed on the OLED screen.When the unit is adjusted above6.0V, or 15W, it will cycle back to the lowest setting (3.0V, or 3.0W.)To check the Battery voltage, hold the - button down for two full seconds while the OLED screen is on and unlocked.The Screen will then display the battery’s current operational voltage.To check the atomizer resistance, hold the + button down for about two seconds while the OLED screen is on and unlocked.The screen will then display the connected atomizer’s resistance.To toggle the device between locked and unlocked output states,press both the – and + at the same time.To access the Tesla menu, hold the + button for about eight seconds.The menu interface will allow you to adjust 3 Tesla settings.1:   When the interface displays “Power Voltage”, you can use this menu option to change between‘Constant wattage’   and ‘Constant Voltage’ mode for the device.

Pressing the - button will switch between the two menu options.2:   When the OLED interface shows the word “Power” the device will be set into constant wattage mode, and regulate itself via calculated wattage output.3:   When the Tesla interface displays the words “LCD Display”, you can use this menu setting to adjust the content displayed on the OLED screen during use.Pressing the - button will switch between menu options.4:   The menu setting “Voltage”, will display the output voltage or wattage of the Tesla on the screen while in use.5:   The menu setting “Resistance”, will display the Ω resistance of the atomizer during use.6:   The setting “Battery”, will display the current output voltage of the battery you are using on the OLED screen during use 7:   The final menu option“ON/OFF” will toggle the OLED display on the Tesla to either active or inactive during the use of the device.Using these two buttons, you will be able to navigate the Tesla menu.